If you have become the victim of a flood you might ask yourself, do I need to call in a professional? After all, it does not look that bad. If you are considering doing some water damage repair yourself you need to read this article. It might help you make up your mind.
When you think of water damage restoration you might think that all that is involved is sucking up the water and putting some fans down. This is pretty easy and you can probably do this yourself and save a lot of money or save an insurance claim. It is not quite that easy though. For starters even if the job did just involve sucking up the water you would not have the right equipment to do so. A shop vac or rental carpet cleaner does not have the same vacuum power of a truck mounted carpet cleaning extractor. Plus the average spill involves hundreds of gallons. How many times would you have to fill that shop vac. And as far as fans go, not just any fan will do. Professional fans cost around three hundred dollars each and are capable of putting out quite a bit of […]
Full Article At: KnowHow-Now.com Articles
If you are having your carpets replaced you will be in the position to choose a new carpet pad as well. Read this article for some information that should help you make this decision. Hopefully it will make your decision easier.
The first thing you will have to decide is what kind of pad you want. The most common type of padding is rebond which is made of recycled material. Besides rebond there is also prime pad which is made of all new materials and several specialty pads that offer resistance to staining and odor. In most cases it is not worth the expense of upgrading to a pad other than rebond so that is normally your best choice. After you have selected the type of pad you will be using you will have to choose the thickness. The most common density is probably 3/8 of an inch and will suit most people just fine. If you want something more plush you might want to upgrade to a thicker pad. I would not suggest using a thinner pad than 3/8 because it will be very hard to step and walk on. Your last choice in pad is density given in […]
Full Article At: KnowHow-Now.com Articles
If you are in the carpet cleaning industry and are thinking about adding upholstery cleaning to your services this article is for you. It will tell you the basic steps involved in inspecting upholstery for cleaning. Read on and get a glimpse into the world of upholstery cleaning.
The first step in upholstery cleaning is identifying the material. I will just go over the basic types of material in this article and not go too in depth. First you will snip a piece of material from a hidden location. The best location is usually inside the zipper of a cushion where here is excess fabric. Now you will separate a thread and burn it. Basically if it burns it is a natural material and if it melts it is synthetic. If it burns quickly like a fuse it is rayon, if it burns slowly and leaves a gray ash it is cotton and wool is very obvious smelling like burnt hair. In general natural materials will be cleaned with a low moisture or dry method while synthetics can be wet cleaned.
The next step in upholstery cleaning is to test the dye stability of the fabric. You will take your cleaner […]
Full Article At: KnowHow-Now.com Articles
